Armored door:
1- The architectural opening is prepared to the required size before the installation date through the customer according to the required size
(100*215 / 110*215 / 120*215 / 150*215 / 180*215 / 200*215 )
2- The door is installed using 4 to 6 screws
3- A complete container of foam is emptied according to the need of the architectural opening and the decision of the installation technician. It is not recommended to use more than two packages.
4- Door accessories are assembled on site with installation
5- Installation is done at the internal ceramic level
6- After installation, the repair is not done by the company’s technicians, but rather by a technician specializing in plastering work after a day or more of installation until the foam dries.
Interior doors:
1- The architectural openings are prepared before the installation date
Rooms 90*215
Bathroom 80*215
2- The thickness of the throat is 15 cm for the room and 17 cm for the bathroom
3- If there is a wall thickness greater than the standard size, custom-made additions are requested.
4- Installation is done with a foam container for each door
5- Installation is not done using nails, but only using foam
6- The door is assembled on site
7- It is determined whether there are HDF floors or not before installing the door
8- The opening direction was determined on site before installation
Smart lock:
1- The door is modified until installation is complete
2- Some models are installed on wooden doors only, and some models are installed on wooden and armored doors
Cleaning methods:
1- Cleaning is done with a furniture polish, such as Pledge Spray or Moral Spray, and is placed on a piece of soft cloth and the doors are wiped well.
2- It is prohibited to clean with water or any other liquids
3- It is prohibited to clean with any caustic materials, such as gas, thinner, gasoline, etc.
4- If there is water on the door, wipe it well to preserve the shelf life of the product
5- The Smart Lock is cleaned with a dry cloth
6- It is prohibited to use water or any liquids to clean products
Methods of use and care:
1- A periodic cleaning cycle is performed when needed for the armored door using WD40
2- Spray a little of the bottle inside the core of the armored door
3- Spray a little of the bottle on the key used to open
4- Spray a little of the bottle into the hole designated for each hinge at the top to eliminate the annoying sound when opening and closing.
5- When the armored door does not close smoothly, please make sure that the gasket or leather strap inside the throat is in its actual place.
6- The armored door is not closed or locked from the flap, if any, but from the external handle only
